Following the requirements of SIST EN ISO 9712, the training of “non-destructive testing” personnel is delivered. The training cover all methods, listed in the NDT methods and products ranging from castings, forgings, welded joints, pipes, to formed products. Within industrial branches we encompass manufacturing, and testing prior to, and during operations.
The new training center facilities are located in the JOB center, CKŽ 135c in Krško. There are two lecture rooms that seat 9 and 20 people, respectively. Both are equipped with all necessary computer, visual and audio technology.
You are invited to take a walk around the premises of the Q Techna Education Center
Available for practical exercises is a laboratory for 10 people, as well as a dark room with modern measuring and testing equipment, and a collection of samples which has been carefully selected over a period of 15 years. The emphasis is laid on practical work, which is the only way for a participant to acquire the sound basis for his/her further professional development. Naturally, most of our lecturers come from industry.
Based on customers’ needs, training can be delivered at other locations, including customers’ premises.
We are pleased that the participants’ feedback on either the training quality, or the setting is very positive. If, occasionally, there is a comment or suggestion for improvement, we always make our best effort to implement it.
Likewise, we welcome every new training participant, and also the returnees, interested in the new quality contents. Since people come back to us that is but a sign we are on the right path.
Survey results prove that good quality is indeed delivered, in every aspect; in terms of lectures and lecturers, the modern premises and the large and manifold collection of samples for practical work.
A great emphasis is put on the selection of lecturers, as we are well aware that even the best possible infrastructure looks dull, unless there are experts with appropriate theoretical and practical knowledge.
A training candidate can be any person, older than 16 years regardless of sex, residency, mother tongue, the employment status and the education level.
For the training of non-destructive testing (NDT) personnel in accordance with SIST EN ISO 9712 in SNT-TC-1A (CP-189) we carry out the following training programs for certification:
In case you do not want to participate in the training for recertification in accordance to SIST EN ISO 9712, you can opt solely for the exam.
Should you choose not to participate in the training for recertification in accordance to CP-189/SNT-TC-1A, you can apply solely for the exam.
|UT equipment hire||150,00|
|Pocket certificate (ID card)||25,00|
To participate in the training the application has to be submitted to the Training center in writing or this application form may be used. Once the application is successfully received and the fee settled, the Training center makes the reservation and informs the customer.
The training and certification fee has to be settled prior to the training or examination to the transaction account at NLB d.d. SI56 0298 0001 6674 363. Until the training and certification fee is paid in full, the certificate is not delivered to the customer.
If the participant fails to pass the exam, he/she is allowed to retake the training, free of charge. When applying for a resit that has to be clearly indicated in the application form.
Applications have to be submitted at least ten (10) days prior to the training. The participation can be cancelled five (5) working days prior to the beginning of the course, in which case, the fee is reimbursed in whole. If the cancellation takes place later, the administrative costs (40% of the fee) shall be charged. Failure to participate in the training or certification procedure without prior cancellation, entails no fee refund. The cancellation has to be submitted in writing.
Partial resit is possible and is charged in accordance with the valid pricelist.
Pre-booking can be made for all announced trainings, and is advisable as a position safeguard, in case of too many applicants for a specific course.
If the participant fails to pass the exam, he/she may retake the training, with no charge. While applying for a retake, the status “resiting the exam” hast to be clearly marked in the application form.
The participation can be cancelled five working days prior to the beginning of the course, in which case the fee is reimbursed in whole. Past the date, the administrative costs (40% of the fee) are charged. Failure to take part in the training or certification, or to cancel the registration in due time constitutes grounds for withholding the reimbursement (100%). The cancellation has to be submitted in writing.
All documentation for certification application (application form with all the required attachments) in the electronic form has to be submitted prior to the beginning of the training to the Head of NDT personnel certification.
Domen Ribič, Head of Training Centre
+386 (0)7 49 12 509
+386 (0)40 609 436
It is possible to make a reservation for all scheduled training courses.
In the case that the participant fails the examination, it is possible to retake training course free of charge. When applying for retake, it must be appropriately marked in the application form.
The deadline for unsubscribing is five working days before the training starts. In this case, we will refund the registration fee in full. In case of cancellation after this deadline, we charge administrative costs (40% of the registration fee). In the case of no show without written cancelation, the registration fee is retained in full.
Program Lead, Certification of NDT personnel
+386 (0)7 49 12 484
+386 (0)41 365 942
Application for certification with all required attachments should be sent electronically, before the start of the training, to the Program Lead, Certification of NDT personnel
|wdt_ID||Month||Beginning of training||End of training||Examination||Method (Application)||Location||According to||Level|
|24||September||04/09/2023||08/09/2023||12/09/2023||Visual Testing||Krško||EN ISO 9712, SNT-TC-1A in CP-189||1+2|
|25||18/09/2023||22/09/2023||26/09/2023||Penetrant Testing||Krško||EN ISO 9712, SNT-TC-1A / CP-189||1+2|
|28||16/10/2023||20/10/2023||24/10/2023||Magnetic Testing||Online||EN ISO 9712||3|
|29||October||02/10/2023||06/10/2023||10/10/2023||Magnetic Testing||Krško||EN ISO 9712, SNT-TC-1A / CP-189||1+2|
|31||05/10/2023||05/10/2023||06/10/2023||Magnetic Testing - Recertification||Krško||SNT-TC-1A / CP-189||II|